Deeply nourishing, beard balm is an important addition to a man’s daily maintenance and grooming routine.
Whatever the shape, length, color, or style of your facial hair, you need the best quality and safest beard balm formula. Some commercial products may contain cruelty and parabens and may even leave stickiness behind.
So, it is essential to have a homemade beard balm recipe. A homemade recipe is usually made of natural ingredients that are completely safe for your facial skin.
The most popular ingredients used in homemade recipes include but are not limited to the following.
- The Best Beard Growth Oils for Men
- How To Make A Chin Strap Beard?
- Ducktail Beard: How To Grow & Sculpt Out?
Beeswax is an animal-based product, and it is the most commonly used ingredient in homemade beard balm recipes.
It is a natural wax that is produced by honey bees. It is made up of about two hundred and eighty-four different compounds.
This ingredient gives a homemade beard balm superior holding properties. It is known to be a great moisturizer and a styling agent for beard men.
It is very effective at curtailing wild and stray facial hair.
This is a wax-like fat that is obtained from the berries of shrubs. This wax, which is mainly extracted by melting in boiling water, is a key ingredient in producing candles and beard balms.
It usually gives a beard balm a characteristic green appearance.
This is an oily extract that is obtained from the shea tree seeds. It is basically a saturated fat with a very gray earthy tan color.
This ingredient usually stays in a very solid form, but if you scoop it up and rub a small amount of it between the palms of your hands, it is going to melt.
Shea butter is chock-full of fatty acids, which is great because it creates a protective barrier for protecting the skin underneath your beard. The fatty acids are also very nourishing and moisturizing.
Softening and Moisturizing Beard Balm Recipe
This beard balm will soften and moisturize your facial hair as well as the skin underneath. All you have to do to keep a good-looking beard is rub a small amount of this DIY balm through your facial hair.
Make sure you gently smoothen your facial hair down. This recipe includes shea butter for moisturizing and softening, beeswax for locking in moisture, and sweet almond oil for conditioning.
Ingredients You Need
- 2 drops of pine essential oil
- 2 tablespoons of beeswax pellets
- 1 tablespoon of sweet almond oil
- 3 tablespoons of coconut oil
- 3 tablespoons of organic shea butter
Bring about two cubic inches of water to a boil and reduce heat to medium. Mix beeswax pellets, sweet almond oil, coconut oil, and shea butter in a glass bowl.
Gently place the glass bowl on top of the pot of water to create a faux double boiler. Make sure there is a 2-inch gap between the boiling water and the bottom of the bowl.
Stir the mixture gently and remove it from heat after a short while. Add the 2 drops of pine essential oil and stir. Then store the mixture in a dark small glass bottle and seal.
Rosemary Pine Beard Balm Recipe
This is a great recipe a woman can make for her beard man. This DIY balm contains pine, rosemary, and a base of carrier oils. This recipe is ideal for conditioning and moisturizing facial hair.
Apart from stimulating facial hair growth, this ointment will also help treat dandruff, itchiness, and dryness on your beard.
Ingredients You Need
- 15 drops of pine essential oil
- 15 drops of rosemary essential oil
- 1 ounce of unrefined shea butter
- 1.5 ounces of beeswax pellets
- 1 C. of pine and rosemary-infused oil
Prepare the infused oil by straining it from the rosemary and pine needles. Then mix the shea butter, beeswax, and strained oil.
Put the mixture in a microwave in short durations of 15 to 20 seconds until you form a homogenous mixture.
Allow the mixture to cool effectively, and then add the essential oils and stir. Transfer the mixture into 2-ounce bottles.
Conditioning Beard Balm Recipe
What makes this homemade beard balm truly conditioning is the inclusion of a cationic emulsifying wax. This ingredient is incredibly neat.
It absorbs your facial hair, creating a lovely thin coating that helps your beard trap moisture better. With a cationic emulsifying wax, your beard will be free of tangles.
This balm will work in the water and oils in your facial hair to keep your beard conditioned and hydrated.
Ingredients You Need
- 6 grams of BTMS 50
- 2 grams of beeswax
- 4 grams of castor oil
- 8 grams of camellia seed oil
- 5 grams of mango butter
- 2 drops of vitamin E
Mix all the ingredients in a small saucepan. Bring the pan to heat on your stovetop as you stir the mixture. Make sure you use low heat to avoid scorching the oils.
All will melt and form a homogenous solution in about half an hour.
Continue stirring the mixture to keep it uniform and creamy. Because you melted the ingredients over direct heat, the solution is going to be quite hot.
So, you should give it some time to cool down before you can add essential oils. Continue stirring as the solution cools to prevent it from solidifying.
You can add Australian cypress oil, pine essential oil, and spruce essential oil. Add 5 drops of spruce and pine, followed by 2 drops of cypress.
Stir the mixture to create a homogenous solution. Now you can transfer the balm to a tin. Give the mixture enough time for it to achieve a superior consistency.
Redwood Beard Balm Recipe
This homemade beard balm features healthy ingredients that are friendly for facial hair and the skin underneath.
It contains a blend of honey-scented beeswax, castor oil, bayberry wax, hemp seed oil, and almond oil.
Bayberry wax is an amazing ingredient made from the waxy coating on the bayberry. It adds a wonderful masculine scent to the beard balm.
Bayberry wax does a great job of moisturizing the beard and reducing flaky skin and itching. You’ve also got unrefined hemp seed oil, which is green and beautiful and contributes a nice grassy scent.
On the other hand, Castor oil helps stimulate facial hair growth and gives your beard a glossy shine.
Another great ingredient added to this recipe is labdanum, which is a wonderful viscous resin that smells amazing.
It is often used as a substitute for amber, green perfumery. The balm is enriched with camphor oil for some fresh air.
Ingredients You Need
- 3 grams of bayberry wax
- 3 grams of beeswax
- 9 grams of sweet almond oil
- 5 grams of unrefined hemp seed oil
- 5 grams of castor oil
- 6 drops of vitamin E oil
- 2 drops of coffee essential oil
- 1 blob of labdanum
- 3 drops of cedarwood oil
- 5 drops of camphor
- 1 drop of pine
- 1 drops of Peru balsam
Mix all the ingredients in a heat-resistant beaker. Place the beaker in a pan with about three centimeters of water.
Put the saucepan with the beaker in it on a stovetop over medium-low heat for around 20 minutes to melt the ingredients. Then remove the beaker from the water bath and dry the water on its base.
Now you can add all your essential oils. You will need 2 drops of coffee essential oil, 1 blob of labdanum, 3 drops of cedarwood oil, 5 drops of camphor, 1 drop of pine, 2 drops of Peru balsam.
Add all the oils into the solution and stir to form a homogenous mixture. Then pour the beard balm into a tin and let it settle for around twenty minutes.
Cedar Smoke Beard Balm Recipe
The unrefined hemp oil and broccoli seed oil are what give this beard balm its characteristic greenish color.
Ingredients You Need
- 5 grams of beeswax
- 4 grams of shea butter
- 6 grams of rice bran oil
- 4 grams of broccoli seed oil
- 6 grams of unrefined hemp oil
- 3 drops of tea tree oil
- 3 drops of bergamot oil
- 5 drops of cedarwood oil
You will need a heat-resistant beaker for mixing the ingredients. Add all the ingredients into the beaker. Pop the beaker into a saucepan with about three centimeters of water.
Put the pan on a stovetop over medium heat for about 30 minutes to effectively melt all the ingredients.
The melting time will vary depending on the size of your beeswax chunks. Keep an eye on the mixture as you stir now and then.
Also, make sure the water bath doesn’t evaporate completely. Remove the beaker from the water bath and wipe the water from the outside. Now it is time to add your favorite essential oils.
Add 3 drops of tea tree oil, 3 drops of bergamot oil, and 5 drops of cedarwood oil. Stir the mixture and pour it into a 1-ounce tin. Allow the solution to settle to form the beard balm.
One thought on “The 8 Best Homemade Beard Balm Recipes”